Cable shielding solutions

PRODUCT DESCRIPTION The shield clamp with integrated strain relief is suitable for contacting cable shields, which are returned over the cable coating and are locked by a shrinking tube and a conducting metal strip. By simply pushing the stripped cable in the shield clamp, there is a permanently high and continuous spring pressure on the cable shield. The contact areas are large, assuring a very good derivation of interference currents. The strain relief is realized by incurved spikes. ADVANTAGES intergrated strain relief permantently high and continuous spring pressure on the cable shield essential higher clamping force high conductivity very good derivation of high-frequency interferences TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION The shield clamp Big for large diameters features a wide clamping range, thus allows an excellent contact of cable shields with large diameters. The stripped cable has to be pressed into the shield clamp. The spring pressure of the clamp offers constant contact with the cable shield. The shield clamp is available for direct assembly with an M4 screw, with clip foot for assembly onto a 35 mm DIN rail and with a flexible flat tape connector with a length of 50 mm. The accessory comonent mounting adapter allows the assembly onto C-rails. ADVANTAGES wide clamping range constant contact with cable shield due to spring pressure high conductance flexible earth connection TECHNICAL DATA Material: galvanised spring steel, nickle-plated spring steel, tin-plated copper

PRODUCT DESCRIPTION The HEBOCLIP serves as a universal carrier for shield clamps with a clamp diameter of 1.5 mm to 30 mm. Simply screw or clip on, snap the chosen shield clamp into place and push the cable shield into the shield clamp. The alternative, using a strain relief bracket, offers the possibility of assembling with the help of a cable tie. ADVANTAGES tool-free assembly on 35 mm DIN rails, busbars and perforated plates universal bracket for shield clamps with a clamping range of 1.5 mm to 30 mm fewer stock items needed strain relief with cable tie TECHNICAL DATA Material: galvanised spring steel, nickle-plated spring steel

PRODUCT DESCRIPTION The shield clamp for direct assembly can be screwed directly, for example, onto the mounting plate. Simply push the cable shield into shield clamp in order to achieve secure contact. ADVANTAGES direct assembly with an M4 or M5 screw very compact design small range of items due to the shield clamp Multi TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION The shield clamp on clip foot can be snapped onto a 35 mm DIN rail without the use of tools. Just press the cabel shield into the shield clamp to achieve a safe contact. ADVANTAGES easy, tool-free assembly constant contact with cable shield due to spring pressure excellent contuctance of high-frequency interferences TECHNICAL DATA Material: galvanised spring steel, nickle-plated spring steel

PRODUCT DESCRIPTION The shield clamp with snap foot can be pushed onto a 10 x 3 mm busbar easily and without tools. The special design ensures a secure hold. By pushing the carriers together, an extremely compact shielding support of several lines is achieved. ADVANTAGES tool-free assembly on busbar or sheet edge extremely compact design optional strain relief with cable ties TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION Snap the HEBOCLIP Uno / HEBOCLIP Duo into place on the 10 x 3 mm busbar or sheet edge and push the cable shield into the shield clamp. A secure hold is achieved because of the special profile. The clip is also available for 10 x 1.5 mm busbars or varying sheet thickness. ADVANTAGES tool-free assembly on 10 x 3 mm busbar or sheet metal edging extremely compact design strain relief using the ADVANTAGES with cable ties TECHNICAL DATA Material: galvanised spring stee

PRODUCT DESCRIPTION The shield clamp for C-rails can be assembled with a 90° turn into C-rail profile with a 11 or 16 mm slot. With the assistance for the M4-fastenign screw the mounting adapter is pinched in the C-rail. Simply push the cable shield into shield clamp in order to achieve secure contact. The strain relief bar offers the possibility of rduciing strain on the cable sheath by using a cable tie. ADVANTAGES small range of items due to the shield clamp Multi strain relief by using a cable tie on the cable sheath very compact design TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION The shield clamp HSK is riveted on a soldering pin and is used for mountingon printed circuit boards. For safe contacting, the cable shield only has to be pressed into the shield clamp. ADVANTAGES easy handling consistently good contact due to spring pressure very good derivation of high-frequency interferences currents TECHNICAL DATA Material shield clamp: galvanised spring steel Material soldering pin: tinned brass

PRODUCT DESCRIPTION The shield clamp riveted on earthing tape allows an excellent large contact of cable shields and derivation of interference currents via a flexible earthing tape. The shield clamp is fixed on the cable shield due to its great clamping force and optimally adapts to the cable routing. Optionally, the shield clamp can be secured with cable tie by a strain relief bar. Optimal solutions can not always be achieved with standardized shield connections. We will gadly find the perfect solution for you. With us you can freely choose the shield clamp and earthing tape in length, cross section and hole diameter. ADVANTAGES technical and economical optimally adapted to your requirements for small and large volumes flexible earth connection

PRODUCT DESCRIPTION The cable shield is pressed into the shield clamp and holds independently due to the large clamping force. A short ground connection can be made with a cable strand at the pre-assembled crimp connection. With the strain relief bracket, the cable sheath can be additionally secured by a cable tie. ADVANTAGES easy handling consistently good contact due to spring pressure very good derivation of high-frequency interference currents TECHNICAL DATA Material shield clamp: case-hardened spring steel Material ring cable lug: red insulation for wire cross-sections 0.5 - 6 mm²

PRODUCT DESCRIPTION The shield clamp for perforated plate can be snapped onto existing perforated plates with a material thickness of 1.5 to 3 mm and a hole dimension of 8 x 8 mm without the use of tools. To assure safe contact, the cable shield simply has to be pushed into the shield clamp. The strain relief clamp provides the possibility of strain relief of the cable sheath by using a cable tie. ADVANTAGES tool-free assembly on the perforated plate wide clamping range fewer stock items extremely compact design strain relief by using a cable tie on the cable sheath TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION The cable fixing plate KAL is suitable for strain relief through cable ties or hook-and-loop tape and derivation of high-frequency interferences on cable shields. The KAL is available for direct mounting, with distance sleeves or clip feet for 35 mm DIN rails. TECHNICAL DATA Material: stainless steel, KAL 59 galvanised steel

PRODUCT DESCRIPTION The shield clamps mounted on a sheet metal mounting bracket enables an ideal adaption to the mechanical measurements. ADVANTAGES customizable to your needs flexible assembly very good derivation of high-frequency interference currents TECHNICAL DATA material shield clamp: galvanized spring steel material sheet: steel

PRODUCT DESCRIPTION A 10 x 3 mm busbar can be assembled variably in regard to height, width as well as at the distance from the connections of the devices. By combining the HEOBCLIPs HS(Z) and HSD(Z) and the shield clamps HSK(M), a great variety of possibilities exists which ensures a constantly excellent conductance of high-frequency interferences. ADVANTAGES variable assembly regarding to width, heigth and distance from the connections of the devices use of standard busbars 10 x 3 mm highly flexible high packing density TECHNICAL DATA Material: galvanised steel, tin-plated copper

PRODUCT DESCRIPTION The HEBOCLIP clamp assembly for direct mounting serves as a universal carrier for up to 12 shield clamps with a clamp diameter of 1.5 to 16 mm. The clamp assembly can be shortened to the required amount by breaking unwanted clips off at the predetermined breaking points. It is then attached using screws. ADVANTAGES connects up to 12 shield clamps per clamp assembly space-saving assembly on the mounting plate universal carrier for shield clamps with a clamping range of 1.5 to 16 mm breaking points allow an adaptation to the required number of cables fewer stock items needed very compact design strain relief with cable tie TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION The clip foot Multi can be snapped onto a 35 mm DIN rail (TS35) without the use of tools. A small slot screwdriver suffices to dismantle. The clip foot Multi serves as a universal multiequipment carrier for assembly on 35 mm DIN rails. It is in two widths and each with M4 or M5 thread available. Due to the flat shape, a good contact surface and a good holding force on the DIN rail is achieved. ADVANTAGES high clamping forces high conductance suitable clip foot for each individual application TECHNICAL DATA Material: galvanised spring steel

PRODUCT DESCRIPTION The EMC grounding clamps with one or two fastening lugs can be used as shield contact directly on the mounting plate or at the electrical equipment. These open grounding clamps stand out due to their easy and problem-free handling. ADVANTAGES universally usable TECHNICAL DATA Material: galvanised steel