Mounting clip

PRODUCT DESCRIPTION The Mounting clip for direct assembly serves as an installation help for the secure fixing of industrial connectors. It is available in two sizes for M8 or M12 connectors. The clip can be mounted with a cylinder screw. Following this, the M8 or M12 connector is simply pressed in from above. It should be ensured that the gap of the connector is positioned in the middle of the clip. Nubs in the material dip into the gap and prevent the connectors from moving in the longitudinal direkction. The different sizes are stackable by a dovetail joint. ADVANTAGES easy handling good holding force universally applicable stackable clip high stability protection from moving lengthwise TECHNICAL DATA Material: PPO, self extinguishing according to UL94-V0

PRODUCT DESCRIPTION The Mounting clip for C11-rails with material thickness of 1.5 mm serves as an installation help for the secure fixing of M12 connectors. The clamping foot can be assembled by a 90° turn into the rabbet of C11-rails, afterwards the M12 connector is simply pressed in from above. ADVANTAGES easy handling good holding force universally applicable simple mounting without tools into C11-rails high stability TECHNICAL DATA Material: PPO, self extinguishing according to UL94-V0

PRODUCT DESCRIPTION The mounting bracket Big for direct assembly serves as an installation help for the secure fixing of M17- and M23-connectors. Two brackets can be mounted with a M6 cylinder screw to insert the connector between the stops of the brackets. Following this the hook and-loop tape is strapped around the connector, then plugged trough the duct of the bracked and fastened. To simplify the exact assembling, the bracket possesses an integrated alignment help at the bottom side. It dips into a optional second drilling on the mounting surface with 3mm diameter. When not using the drilling, the alignment help disappears in the bracket during assembly. ADVANTAGES easy handling good holding force integrated alignment help self-extinguishing according to UL94-V0 TECHNICAL DATA Material mounting bracket: polyamid, reinforced with glass fibre, self-extinguishing according to UL94-V0 Material hook-and-loop tape: polypropylene, self-extinguishing according to UL94-V2